Thanks to Lex for educating me. Perhaps others can use this feature.
From: Lex Kister [mailto:w4xo at hotmail.com]
Sent: Sunday, January 13, 2008 8:08 PM
To: Jeff W4DD
Subject: Re: [SECC] Writelog Question
Jeff,
You need to change the writelog.ini file. It's easy
press start on the desktop, then run, and enter writelog.ini in the open:
window. Once the writelog.ini file opens,you will then need to change the
command for the F11 key. The command is about 90% down the file. Edit the
command F11 to read F11=entryclear, then save the file.
Tks for the good idea. I just changed my ini file
Lex,
w4xo
----- Original Message -----
From: Jeff W4DD <mailto:w4dd at arrl.net>
To: secc at contesting.com
Sent: Sunday, January 13, 2008 7:36 PM
Subject: [SECC] Writelog Question
Does anyone know how to make the F11 key clear the entry fields (same as
ALT+W)?
I've set CtCompatibleAccel=YES, which makes the F1 key send CQ, but the F11
key just does the same as F1. I've done a Google search but no luck.
Thanks,
Jeff
_____
_______________________________________________
SECC mailing list
SECC at contesting.com
http://lists.contesting.com/mailman/listinfo/secc
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.contesting.com/pipermail/secc/attachments/20080113/f041a2f2/attachment.htm
|