TRLog
[Top] [All Lists]

[TRLog] Band Change Timing

Subject: [TRLog] Band Change Timing
From: lu6beg@canopus.com.ar (Ernesto Grueneberg)
Date: Mon, 30 Jun 1997 23:17:05 -0300
> A step in the right direction might be a way to see the last time a Q
> was made on each band by each identified computer in the network.
> 
> for example:
> 
> current time 0330Z
> run rig is now on 40 (Rig A)
> the other rig (B) used to be the run station on 20 and is now working
> mults on that band.
> neither rig has been on 10 yet.
> 
> A window or pop-up might display something like:
> 
>      -----------------------------------
>      | Band  Rig A   Rig B   ...  ...  |
>      | 160   0230    ----              |
>      |  80   0211    ----              |
>      |  40   0330    0301              |
>      |  20   0208    0329              |
>      |  15   0120    0040              |
>      |  10   ----    ----              |
>      -----------------------------------
> 

For CQ WW multi-single the answer might be like this:

in the run station, a line that looks like

160  80  40  20  15  10

when you'start running, ie on 15m, it changes to

160 80  40  20  *10*  10   and counts down to 0, then it changes to *OK*

(this means you can QSY)

At the same time, the mult station is marked this way . ie 20m

160  80  40  MULT  *7*  10

So you can see that there's 7 min left to be able to QSY from 15m AND
you can QSY to any band but 20m

What you think??


-- 
Ernesto M. Grueneberg
LU6BEG

mailto:lu6beg@canopus.com.ar

htpp://www.qsl.net/gadx
mailto:GADX@qsl.net


--
FAQ on WWW:               http://www.contesting.com/trlogfaq.html
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com

<Prev in Thread] Current Thread [Next in Thread>
  • [TRLog] Band Change Timing, Ernesto Grueneberg <=