TRLog
[Top] [All Lists]

[TRLog] Version 6.16 release notes

Subject: [TRLog] Version 6.16 release notes
From: n6tr@teleport.com (Tree N6TR)
Date: Tue, 11 Nov 1997 22:53:28 -0800 (PST)
          Release notes for TR Logging Program - Version 6.16
                             11 November 1997


Version 6.16 - Released 11 November 1997.  (New manual coming)

 - Made SS exchange with a trailing space not count as a callsign.

 - Made Two radio stuff all work with DVP.  This also includes support
   for the footswitch when in normal mode (used to send exchanges).  The
   DVK mostly works okay as long as you don't turn on the two radio mode.
   This means it is possible to work guys on the second radio, you just
   don't get the automatic CQs back on your run frequency.  This has to
   do with the fact that TR can't tell when the DVK is done with a
   message.

 - Extended band output port to work up to 1296.

 - Fixed overflow when total QSO points for a log gets over 32K.

 - Fixed BandMap instantly showing a station as a dupe when you call in
   Search and Pounce mode.  Now it waits until you actually log the QSO.

 - Changed bandmap access key to Control-End.

 - Added Control-PageUp and Control-PageDown to adjust inactive radio
   code speed.

 - Added DUPECHECK to footswtich modes and function key commands.

 - Fixed PTT not working if you use special dits/dah only in message.

 - Added HOUR DISPLAY command to control the hour display.  You can
   select either THIS HOUR (just like it used to work before) or the
   new mode LAST SIXTY MINUTES which will show you the number of QSOs
   made in the last 60 minutes.

Version 6.15 - Released on 29 October

 - Grid squares that have Y or Z in them are no longer legal.  These
   are illegal characters.

 - Several DVP related fixes having to do with files.  First, if you
   use the DVP PATH command in your LOGCFG.DAT file, your .DVP files
   were not being copied to the place indicated.  This is now fixed.

   Next, you will be asked if you want to save the .DVP files that
   are in DVP PATH when you exit the program.  They would be saved in
   the working directory (same one that the LOG.DAT file is in).

   Finally, when you save more than one backcopy file with the same
   QSO number, it should have a letter appended to the QSO number to
   make a unique filename.  This was not working if you used the DVP
   PATH command (either in your AUTOEXEC.BAT or LOGCFG.DAT file).  This
   is now fixed.  The files are saved in the current directory regardless
   of the setting of the DVP PATH.

 - You can now put file copy commands in your LOGCFG.DAT files.  This
   allows you to have personal DVP files off somewhere and copy them
   wherever you need them.  The syntax is

     COPY FILES = SourceDir FileName DestDir

   You can use a period for the current directory.  You can use
   wildcards (*) in the filename to copy multiple files at once.

 - Made packet spots in CW/SSB gray areas just keep ActiveMode.  This
   applies to 3530 to 3600 kHz, 7030 to 7100 KHz to name a couple of
   cases.  Before, if you grabbed a packet spot in one of these
   ranges, it was possible that you would be switched from CW to SSB
   improperly.

 - Eliminated first two letters of country name from getting erased
   if you do a second dupe check.

 - Added CWMONITORON and CWMONITOROFF function key commands.  Put
   these at the start of a CW message to turn off (or on) the
   computer speaker sidetone.  Put a Control-C just before the command
   and a Control-D after it.  You can only put one of these commands
   in a single message (i.e., you can't turn it back on at the end
   of the message - instead, you need to turn it on for all of the
   messages you want it on for).

   See section 4.2 under Control-C and Control-D for more information
   on these types of commands.

 - Added PACKET AUTO CR command (control-J - default = false).  When TRUE,
   a carriage return is sent to the packet port when you exit the
   Control-B window and have started typing a new line.  This prevents
   the TNC from holding back data waiting for you to finish your entry.

 - Added TRACE startup command.  If you are having problems with the
   program hanging when logging a QSO, this is intended to give me
   some idea where the program is hanging up.  Start the program by
   typing TR TRACE and continue normal operation.  When the program
   hangs, you will see some funny characters in the call or exchange
   window.  Tell me which ones you see.

   Hopefully this command will scare any remaining problems away.

 - Fixed the terrible packet bug.  Yes - a equal sign instead of a
   greater than sign in the procedure that deletes the guy you just
   worked from packet display resulted in the hang ups.

 - Some clean up of .DOM files.  Now use Qc instead of Pq for Ve2.

 - Added PACKETSIMULATE start up command.  Allows you to use a second
   computer to generate massive quantities of pack spots (about one
   per second).  You get to select which port you want to use and
   it does the rest.

 - Added PASSTHROUGH start up command.  This allows you to logically
   connect two serial ports together.  I know it works up to 4800
   baud.  Might not work at 9600 baud on "slower" computers.  This
   allowed me to connect my development computer to a packet node
   on the internet by talking through my BBS computer.

Version 6.14 - Released on 23 October

 - DVP timing changed to hopefully to work with faster computers.


Version 6.13 - Released on 22 October.

                               *** WARNING ***

  Version 6.13 has significant changes to the packet interface.  While
  each new feature has been tested, the whole package has not been used
  under actual contest conditions yet.  Please spend the appropriate time
  testing this version before using it in a contest.

                               *** WARNING ***

 - New CTY.DAT file from AD1C.

 - Fixed TAIL END MESSAGE not being written correctly to LOGCFG.DAT file
   when changing it with the Alt-P command.

 - Fixed FT920 selection for radio 2 (worked only for radio 1 before).

 - Added QSX frequency support for packet.  If the QSX ENABLE flag is
   TRUE, then incoming packet spots will be examined for QSX data.  If
   something is found - it will be shown in both the Control-U menu and
   the band map.  For the band map, an x will appear after the frequency.

   When selecting a spot with QSX data, your radio will be put into
   split mode and your B VFO set to the tranmit frequency.

 - To add QSX information to packet spots you are generating, set the
   PACKET SPOT EDIT ENABLE command to TRUE.  This will allow you to
   edit your spots before they go out.

Version 6.12 - Released on 12 October.

 - Updated QSO points for VK/ZL contest to new rules.

 - Created method for showing station status in a multi network.  The
   message is set with MULTI INFO MESSAGE (using control-J).  Put a
   $ in the message to show CQ freq or S&P.  Use % to show your rate.

   To view everyone's info, use the Control-E command.  You have to
   have your own MULTI INFO MESSAGE set for the Control-E command to
   work.  The data is shown in the editable log window.  Stays there
   until you log a QSO.

   If your radio isn't interfaced, you can set your "CQ" frequency
   by entering your frequency in the call window.

 - Added HP startup command.  This is a simple HP style calculator
   utility.  In case you need a calculator on your next dx-pedition.

 - Added LC startup command.  If you are using your SWR analyzer to
   measure inductance or capacitance, allows you to enter the resonant
   frequency, and the value of your standard cap or coil, and it will
   compute the value for you.

 - Allow for SERIAL 5 and SERIAL 6 to be specified as a serial port.
   Use SERIAL 5 PORT ADDRESS or SERIAL 6 PORT ADDRESS to tell the
   program the base I/O address for the port (in hex).

 - Improved CALQSOW6.DOM and removed a few errors.

 - Added ORION PORT for the Orion rotator.  Use Control-P to send the
   rotator to the country of the station entered in the call window.

 - When doing the dupe check in POST, if you find a QSO previously marked
   as a dupe which isn't, POST doesn't know how to calculate the proper
   QSO points for the contact.  There is now a warning message telling
   you to go and update the QSO points when this happens.

 - Fixed ControlA/ControlB for DVP and DVK.  This should make two radio
   operation on SSB possible now.

 - Made Grid Map update after Alt-E.

 - Fixed FM mode display.

Version 6.11 - 10 September 1997

 - Fixed scoring for SAC contest if in Scandanavia.

 - Made visible dupesheet update with Alt-R to new band/mode.

 - Much improved operator interface to dualing CQ mode when it is on.

 - Added SEND COMPLETE FOUR LETTER CALL (control-J - default = False).
   Makes the } character in a CW message send the whole call when a
   four letter call is corrected (instead of just the suffix or prefix).

 - Made original logfiles in POST use PLOG###.BAK where ### increments.
   This should eliminate cases where people loose their log by repeating
   a operation in POST with a bad file.

 - Fixed Band map restart not loading in saved band map.

 - Fixed spaces in duping sheet file names.

Version 6.10 - 29 August 1997

 - Fixed dupesheets for VHF/UHF and WARC bands.

 - Showed active radio at power up.

 - Made CQ EXCHANGE work with DVK.

 - Made callsignn character pressed during Auto-CQ abort CQ in progress.

 - Added TAB MODE = NORMAL or CONTROLF (Control-J - default = NORMAL).
   When set to CONTROLF, when using the Alt-E editor, the TAB key
   will move the start of the next word instead of the next field.

 - Added CLEAR DUPE SHEET command for LOGCFG.DAT file.  This will only
   work when running the file with the Control-V command.

 - Increased size of name window by 2 characters.

 - Expanded on screen instructions for Control-J command to 2 lines.

 - Made Alt-G in Control-J write to specified file.  This means you can
   make a bunch of changes, save them to a file, and then make those
   same changes again just by executing the file with the Control-V
   command.  This might be handy in the case of multi-operator situations.

 - Changed timing when switching radios to give the relay time to
   switch to the other radio before asserting CW or PTT signals.

 - Fixed problem with messages sometimes not abortin when using two radio
   keying and the same port for both radios.

 - Added MESSAGE ENABLE (control-J - initially false).  When FALSE, all
   automatic messages such as QSL MESSAGE and CQ EXCHANGE are disabled.

 - Added ability to enter hundreths and tenths of hertz in call window.

 - Changed Control-V command to execute additional config file.  Use
   INSERT key for old function (turning on/off insert mode).

 - Fixed NORMAL footswitch mode so CW can be sent.

 - Fixed IARU defauly exchanges to use IARU zones, not CQ ones.

 - Added function key commands DISABLECW, ENABLECW and CWENABLETOGGLE.
   These change the value of CW ENABLE.

 - Type DEBUG in call window and hit RETURN to re-enable simulator debug.
   Eliminates having to stop the program and retyping TR DEBUG.

 - Increased Icom Command Pause default to 300ms and timeout to 500ms.

 - Fixed visible dupesheet random formating problem (column mode).

 - Fixed last entry of visible dupesheet possibly being out of order.

 - Added CONTROL ENTER to foot switch modes (advance QSO with no CW).

 - Fixed bug where ControlPageDown doesn't send radio to freq if in S&P
   mode and also made it do initial exchange when going into S&P mode.

 - Added BANDMAP.BIN - remembers band map when program stop/started.

 - Fixed WAIT FOR STRENTH (was still waiting for a keystroke).

 - Added START SENDING to FootSwitch Mode - starts sending callwindow.

 - Added LOG FREQUENCY ENABLE command (control-J, default = false).
   Replaces serial # with frequency (without leading megahertz).
   Frequency has a leading decimal point to make it clear it isn't a
   QSO number.

 - Disabled band map switching to a tuning radio if not two radio mode.
   Previously it would do this even if TWO RADIO MODE = FALSE.

 - Fixed bug with Radio Two not updating band output port if it was
   the inactive radio.

 - Added AUTO S&P ENABLE (control-J, default = false) to jump into
   search and pounce mode when tuning the radio more than 1 kHz.

 - Added FREQUENCY MEMORY command.  Used to tell the program the
   defaults to use when QSYing to a specific band/mode.  Simply
   tell it the frequency and the program will figure out the proper
   band/mode for it.  If you are trying to set a SSB frequency that
   is considered the CW band, put SSB before the frequency (i.e.
   FREQUENCY MEMORY = SSB 7050).  Note that these defaults will be
   over-written if you set FREQUENCY MEMORY ENABLE = TRUE.

 - Added defaults for 2 meter frequency memory.

 - Made FrequencyMemory get saved in RESTART.BIN file.

 - Added FREQUENCY MEMORY ENABLE command (control-J, default = TRUE).
   This turns on the memory for each band/mode.  When you come back
   to the band/mode (with either radio), it will go to the previous
   frequency.

 - Made frequency memory work - it was disabled.

 - Made CQ MENU come up if in SSB (not sure why I made it CW only).

 - Fixed frequency display sometimes not showing up when switching
   between radios.

 - Made zone check against CTY.DAT in POST L M an option.

 - Fixed bug where bandmap and visible dupesheet might be written twice.

 - Fixed band map opeartion on 10 meters (showed all the bands before).

 - Allowed three digits to be entered into call window for QSY.



Version 6.05 - Released 24 June 1997.

 - Added DISTANCE MODE (NONE, MILES, KM).  Shows distance to station
   along with beam heading.  Available on Control-J menu - default = NONE.

 - More RFI counter measures during Control-J keyboard loop and Auto-CQ
   loop.

 - Fixed Control-J entries not showing up near end of list.

 - Added BEEP ENABLE (default = TRUE + Control-J) turns off all beeping.

 - Added WAIT FOR STRENGTH (default = TRUE + Control-J).  If using the
   { character in a CW message to wait for RST input, it will assume
   you pressed a 9 if no key pressed in time.

 - Added NL section (VO1/VO2) to ARRL.DOM.

 - Fixed some problems with frequency memory for VHF.

 - Fixed inability to program FT920 in LOGCFG.DAT file.

 - Made initial exhange of grid show beam heading and also user info.

 - Added RANDOM CQ MODE (default = FALSE + Control-J).  When TRUE, the
   program will randomly pick F1 through F4 for you CQ message when
   auto CQing (Alt-Q).

 - Fixed Pentium II divide by zero problem!  The program should now
   run on those 266 mhz CPUs.

Version 6.04 - Released 13 June 1997.

 - Fixed possible runtime error 200 when showing grid square beam
   heading when typing into call or exchange window.

 - Disabled DXCC beam headings if ActiveDomesticMult = GridSquare.

 - Added FREQUENCY ADDER (Control-J) - Initial value = 0.  This can be
   used to make your 10 meter radio look like a VHF radio for use with
   the bandmap and frequency commands.  For six meters, use 22000000.

 - If no multipliers in contest, made summary sheet total score equal to
   the total QSO points.

 - In European DX - mades calls like F/N6TR/P count as portables.

 - Made some minor timing changes to the program to reduce RFI on
   six meters.


Version 6.03 - Released 8 June 1997

 - Added FT920 as radio type - let me know if you have any problems
   since I don't have one of these radios available for testing.

 - Added transmitter split support for Icom.  Use the DASH or Alt-N
   command to enter your QSX frequency.

 - Added auto beam headings for grid squares.  When you type in a
   grid square into either the call or exchange windows, the beam
   heading will be displayed (make sure MY GRID is set correctly).
   This is only enabled if your domestic multiplier is GRID SQUARES.

 - Added NO POLL DURING PTT (control-J) - default = False.  When TRUE,
   the program will not poll the transceiver if the PTT signal coming
   from the computer is asserted.

 - Fixed missing CarriageReturn for packet spots from networked computer.

 - Fixed POST's R L report so it shows all mults.

 - Added DUPE CHECK SOUND (^J) = NONE, DUPE BEEP, MULT FANFARE.  DUPE BEEP
   is the default.  If set to MULT FANFARE, then you will hear the
   multiplier bell if the call you are checking is a new multiplier.
   This only works for DX, Prefix or Zone multipliers.

 - Fixed lower case "true" not working with LEADING ZEROS command in LOGCFG.

 - Added cut serial number support for RST QSO NUMBER exchange.  You can
   enter T or O (the letter O) for zero, A for 1, U for 2, E for 5,
   and N for 9 when using this exchange.

 - Eliminated possibility of long call window message overflowing variables.
   This had caused the COMPUTER ID parameter to assume a non null value
   for some people.


Version 6.02 - Released 26 May 1997

 - When using F1 or F2 to call CQ with (regardless of mode), the program
   will remember the frequency you are calling CQ on (requires interfaced
   radio).  If you go off to work a station on a different frequency
   (i.e. by grabbing an entry from the band map), you can now return to
   your run frequency using one of two methods:

   1. Use the function key command LASTCQFREQ.  To enter a function key
   command, put a Control-C in the function key message, then the command,
   followed by a Control-D.  You can enter control characters while using
   the Alt-P command by preceding them with a Control-P.

   2. Use the external footswitch and set the FOOT SWITCH MODE to LASTCQFREQ.

 - TR now uses its own serial port initialization routines.  This has at
   least two advantages.  First, if your BIOS doesn't recognize your
   serial port, TR will still try to initialize it.  Secondly, TR now
   turns on both RTS and DTR signals which is the more "proper" thing
   to do.  However, if you also assign the serial port as a CW output
   port, the signals will be used for CW and PTT instead.


 - If you called a station in Search and Pounce by entering his call and
   pressing RETURN, the band map entry was not correct until you finished
   the QSO.  This has been fixed.

 - If you started up the program wihtout a LOGCFG.DAT file, some of the
   contest selctions would not work correctly.  This has been fixed.

 - In the last version, I tried to speed up the search and pounce mode
   by logging the QSO after the display has been updated.  This worked
   okay except some of the info on the screen was then one QSO behind.
   I went back to logging the QSO and then refreshing the displays.

 - Added RADIO ONE UPDATE SECONDS and RADIO TWO UPDATE SECONDS (Control-J).
   These allow you to slow down how often the program goes to the radio and
   asks for its frequency.


Version 6.01 - Released 12 May 1997

 - Added INTERNET SIX contest.

 - Enhanced questions at start of program if no LOGCFG.DAT file found.

 - Added INTERCOM FILE ENABLE - interstation talk messages to INTERCOM.TXT.

 - Added IOPort startup (not in 6.01 manual).  This lets you poke/peek IO
   ports for debugging purposes.

 - Added support for a foot switch to be connected to pin 15 of an LPT
   port.  Use FOOT SWITCH PORT to tell the program which port is being
   used (1, 2, or 3).  Use FOOT SWITCH MODE to select what happens when
   you press the footswitch:

     DISABLED:    Nothing happens.
     NORMAL:      Normal PTT action on the active radio.
     QSO NORMAL:  Like hitting RETURN to move a QSO to the next step.
     QSO QUICK:   Same as QSO NORMAL, except uses QUICK QSL MESSAGE.
     SWAP RADIOS: Like pressing Alt-R.

 - Fixed POST Q C. Was rewritting NAMES.NEW each time instead of appending.

 - Fixed not calling portables by name in SayName (was okay in SayHello).

 - Fixed not having access to USER4 and USER5 for updates.

 - Cleaned up a lot of the packet stuff.


Version 6.00 - Released 14 April 1997

 - Added RST AND CONTINENT exchange for the SOUTH AMERICAN WW contest.
   This contest has also been updated with new rules.

 - Added TEXAS QSO PARTY.  Use MY STATE = TEX before the CONTEST statement
   if you are in Texas.  TEXAS.DOM gets used if you are outside of Texas,
   and TEXASTX.DOM gets used if you are in Texas.  Some cleanup of these
   files has been done.  Also, you will need to count the state of Texas
   yourself if you are in Texas.

 - Added DVP PATH logcfg command + control J.  Use this instead of putting
   SET DVPPATH in your AUTOEXEC file.  Example: DVP PATH = D:\

 - Fixed bug with auto SCP and using AUTO SEND cw.  When you press the
   letter of the callsign that starts the CW, the SCP display would not
   update until you pressed another letter.  This is now fixed.

 - Fixed not saying hello to portable stations.

 - By rearranging some of the procedures used during logging of a
   QSO, the display now updates much faster than before.  This should
   really help those with slow disks or computers.

 - When callign station with RETURN in S&P - it is now added to bandmap.

 - When in S&P and you change a call in the exchange - the bandmap &
   station info now get updated with the new call.

 - Fixed display formating problem in Auto CQ if time >= 10 seconds.

 - Made CQ entries in band map show up when using DVK.

 - Made BROADCAST ALL PACKET DATA not do anything if no network port.
   This fixes a very bad bug if you tried to use the packet port without
   a network.

 - Fixed SLASH MARK CHARACTER -> CHAR from Control-J into LOGCFG.DAT file.


--
FAQ on WWW:               http://www.contesting.com/trlogfaq.html
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:         http://web.jzap.com/n6tr/trwish.html

<Prev in Thread] Current Thread [Next in Thread>
  • [TRLog] Version 6.16 release notes, Tree N6TR <=