Hello Tom,
Sunday, 6 September 98, you wrote:
TD> I am attempting to interface an IC-735 for rig control and cw sending
TD> from one serial port. I can get either rig control or CW, but not both.
TD> When both are enabled, I get only CW.
TD> Is it possible to get both at the same time from one port? If so, what
TD> is the magic secret?
TD> --
TD> Thomas M. Delker - K1KY CFO#395 - Smyrna / Gallatin / Short Mtn. TN
TD> A.R.R.L. District Emergency Coordinator - Tennessee District #4
TD> C.A.T.S. (W4CAT) - 147.30/145.23/145.49/145.17/223.98/444.45/444.65
TD> Stones River A.R.C. (K4FUN) - http://www.members.home.com/srarc
TD> Tennessee Contest Group (K4TCG) - http://www.k4ro.net/tcg.html
TD> Fistfighters United Nashville (NT4L) 146.955 (114.8)
Try following :
MY CALL = K1KY
CONTEST = ALL ASIAN
DISPLAY MODE = COLOR
KEYER RADIO ONE OUTPUT PORT = SERIAL 1
RADIO ONE TYPE = ic735
RADIO ONE RECEIVER ADDRESS = 4
RADIO ONE CONTROL PORT = SERIAL 1
RADIO ONE BAUD RATE = 1200
...
It works here OK under W95/W98.
Best regards,
Nick, UT2UZ mailto:nf@texpo.kiev.ua
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|