Hi All.
I forgot to add one tip. May be it helps to somebody.
Since I work only under Windows98 there was some problems
with radio control. But it's only port initialization
problems. Now before run TR I init port for radio with
comtsr from CT by K1EA. I run TR from this t.bat :
---------------
comtsr#.exe rem load driver with parameters if need
comtsr#.exe -u rem unload it
tr.exe rem run tr
---------------
And now I forgot about any problems with radio control
under Windows at any speed.
73 de Serge UT2IO
>I know about irq and speed limitation, but my TS-870S works
>without any problem from 1200 to 57600 with your program.
>But no any difference too :-). (Packet doesn't, only to 4800)
>> I just (finally) got TRLog working with my OmniVI. I had to drop the
>> baud rate to 4800 for it to work. As the rig can handle 19200 (as can
>> my main std logging program LOG-EQF), I was quite surprised that trlog
>> couldn't. Am I missing something here? Is there an update that can
>> handle the higher date rates?
>TR trades maximum port speed for having to worry about IRQs. The
>messages from the radio are short and you won't notice any difference
>in the operation at the slower speed.
73 de Serge UT2IO
e-mail: ut2io@qsl.net
FidoNet: 2:4652/2.11
Packet: UT2IO @UX0IXI.DON.UKR.EU
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|