Apologise if I come back...
but the problem was not about this
> > KEYER RADIO ONE OUTPUT PORT = SERIAL 1
> > RADIO ONE CONTROL PORT = SERIAL 1
it was about other interesting things also, like:
> >I cannot set the frequency, typing the freq in the window call.
> >If I try to set the VFO B (with -)
> >TR ask me for frequency but do not set it as of before.
> >If I change band on the rig, TR do not recognise it,
.....
> >When in S&P, and hit the space bar for the dupe check it
> >does not set the call in the band map
.....
> >Also the shift does not operate as expected
......
> >Do I have to set some of the RIG parameters also?
> >like ICOM COMMAND PAUSE and ICOM RESPONSE TIMEOUT.
The logcfg file was intended for help, .........
not for deviate from the main path!!
Anyway, is there out there anybody with some hints?
Thank you very much in advance.
Bob,I2WIJ
-----Messaggio originale-----
Da: n6tr@teleport.com [mailto:n6tr@teleport.com]
Inviato: 13/04/99 19.20
A: rrossi@btv.ibm.com; trlog@contesting.com
Oggetto:
> > MY CALL = I2WIJ
> > CONTEST = CQ WW
> > DISPLAY MODE = COLOR
> > KEYER RADIO ONE OUTPUT PORT = SERIAL 1
> > RADIO ONE CONTROL PORT = SERIAL 1
>
> Can you use the serial port for both control and keying?? Which control
> statement wins?
They both win. You can do this as long as you tie the RTS/CTS signals
on the TNC together since the computer won't be able to drive them.
I even have done this:
KEYER RADIO TWO OUTPUT PORT = SERIAL 1
RADIO ONE CONTROL PORT = SERIAL 1
They don't have to be the same radio!
Tree
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|