> Is it possible to tell TR what io ports you are using for Serial ports
> 1 - 4? I posted a question regarding this issue at the end of May.
Not currently.
> TR appears to be getting the base io address for serial ports 1 - 4 from
> the bios address 0000:0040 (as expect), I can go in with debug and
> modify these address to solve my problem, but it would be nice if there
> were commands for serial ports 1 - 4 like there are for serial ports 5
> and 6 (for example):
>
> serial 5 port address = dc00
> serial 6 port address = dc10
>
> What is the possiblility of these commands being added for ports 1 - 4
> in a future release of TR? Modifying the bios memory address with debug
> is a real pain. I guess I should break down and write a quick and dirty
> program to do the job. :)
I will look into it - probably not too hard to implement. Or perhaps
I can create SERIAL 7 and 8?
Tree
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|