> 1)
> I would like TR "NOT" to key-down the TX while waiting
> the choice of the right config file!! at startup!!
Is it not keyed until TR starts up? I think this has more to do with
how the port is left configured before TR starts up.
> 2)
> Possibility, if PTT not used,
> to decide whether to have it set: high or low??
> PTT ENABLE = FALSE
> PTT REST STATE = HIGH (or LOW)
> The reason of the request is becouse
> I discovered that my problem of not interfacing
> correctly the IC706, with the home made
> RS232 adapter,was due to the fact that, the adapter,
> gets its power supply from the PTT pin (from the DB9 connector) which is
> only asserted when transmitting!
> In fact when CQing, the radio is polled and the freq displayed.
> It works fine if I use the parallel port for cw keying
> but I have the printer on that port!
I would suggest not using the same port for keying as radio interface.
Tree
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|