At 05:19 AM 11/29/1999 -0600, Doug wrote:
>
>I've been having an ongoing problem where I'm not able to abort the
>transmission of CW. A couple of times during the WW, while S&P I'd hit
>the wrong key & start to send the exchange instead of my call. I'd
>immediately hit the Escape key, but almost the entire exchange would get
>sent before the CW would abort. ("TU 5NN T", the 4 would get aborted
>about halfway through) There was also a delay aborting transmission of
>my call or of "TU W9WI" after a run QSO, but those delays wouldn't be as
>bad.
>
>It seems to be the general consesus (I can never spell that word!) that
>running SMARTDRV is the fix for this -- but it doesn't seem to have any
>effect in my case. There are no error messages at boot when loading
>it.
>
>FWIW, version 6.46 (though I have had the same situation with all
>previous versions I can remember) on a 486-66 with 8MB total RAM - no
>radio interface (really need to fix that 940...) or packet running.
I had the same problem. Never saw it in earlier versions. I was running
6.45. My computer setup is otherwise unchanged from past versions. My
computer is a 200MHZ Pentium with 32 MB.
73, Pete N4ZR
Sometimes a tower is just a tower
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|