[Top] [All Lists]

[TRLog] TS-870

Subject: [TRLog] TS-870
From: (Gil Baron W0MN)
Date: Thu, 16 Dec 1999 17:05:30 -0600
I am set to 4800 with 2 stop bits. I am using a fully wired cable.
It fails if I wire it the way the documentation talks about. I must us a
fully wired cable because I also use it with Logic 5 and other programs that
require fully wired cables.
I realize this makes it impossible to use the serial port for push to talk
but I think that is not good practice to use the same port in any case. I
use my other port for push to talk with other programs and I use VOX with

> -----Original Message-----
> From: George Fremin III []
> Sent: Thursday, December 16, 1999 2:58 PM
> To: Gil Baron W0MN
> Subject: Re: [TRLog] TS-870
> Gil Baron W0MN writes:
> >
> > George;
> > I have an 870 and interface it with very little problem.
> > Sometimes it seems that it might be nicer if it were a faster
> response to
> > frequency change but that is the polling he does so doubt can
> do anything.
> > It takes about 3/4th second usually, not all that bad.
> > I am using a very simple interface, just as shown in the
> documents and no
> > optical or anything.
> >
> What baud rate do you have it set for - what menu setting?
> Are you usign a fully wired cable.
> --
> George Fremin III          "I'm talkin' 'bout that outlaw X
> Johnson City, TX             It's cuttin' through the air.... "
> K5TR (ex.WB5VZL)
> 830/868-2510                      -- "Heard it on the X"
>                               -- ZZ Top

FAQ on WWW:     
Administrative requests:
Feature Wishlist:

<Prev in Thread] Current Thread [Next in Thread>