I started playing with the two radio mode for the first time, and I must be
missing something cant get it to talk to both radios.
The first radio is a TS-950 on COM2
The second radio is a TS-870 on COM3.
The program recognizes and controls Radio #1 just fine, but I cant get
communication with the second radio to occur when I hit the Space Bar. When I
set up in single radio mode I can get the program to talk to which ever radio
is set up so I know the radio and COM port designations work for both radios
individually. I also tried changing which radio is #1 vs #2. Below are the
relevant commands from the .CFG file
TWO RADIO MODE = TRUE
KEYER RADIO ONE OUTPUT PORT = PARALLEL 1
KEYER RADIO TWO OUTPUT PORT = PARALLEL 2
RADIO ONE TYPE = TS950
RADIO TWO TYPE = TS870
RADIO ONE CONTROL PORT = SERIAL 2
RADIO TWO CONTROL PORT = SERIAL 3
RADIO ONE BAUD RATE = 4800
RADIO TWO BAUD RATE = 9600
Any clues? What did I miss?
NR1DX
Dave
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|