TRLog
[Top] [All Lists]

[TRLog] packet

Subject: [TRLog] packet
From: k6ll@juno.com (k6ll@juno.com)
Date: Tue, 6 Jun 2000 10:51:24 -0600


On Tue, 6 Jun 2000 11:20:18 EDT W3GT@aol.com writes:
> 
> i got my trlog program at dayton, and have loaded it onto my h.d. i 
> have gone 
> thru a few parts of the program and like it a lot. but no mater what 
> i do or 
> what commandes i give to <logcfg.dat> i still canot get the program 
> to talk 
> to my tnc. i have a kam plus  tnc and it works great , but will not 
> work with 
> tr log. i hope some one can walk me thru the set up of my < 
> logcfg.dat > 
> file. thanks for any help you can give me. phil  w3gt

Try this:

Using the software that came with your Kantronics, set the tnc
baud rate at 2400, then exit the program. The tnc remembers its
last baud rate setting. Put the following statement in logcfg.dat:

eight bit packet port = true

Good luck.

Dave Hachadorian, K6LL
Yuma, AZ
K6LL@juno.com























--
FAQ on WWW:               http://www.contesting.com/FAQ/trlog
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:         http://web.jzap.com/n6tr/trwish.html


<Prev in Thread] Current Thread [Next in Thread>