Floyd Sense - Angier, NC
----- Original Message -----
From: "Floyd Sense" <sentek@sprintmail.com>
To: <trlog@contesting.com>
Sent: Wednesday, October 25, 2000 11:09 AM
Subject: Help new TR user!
> I'm a new TRLOG user, with version 6.52. The PC is a 233 MHz K6, running
> Win 98. Rig is TS-850S, MFJ-1270C packet controller. I wanted to try out
> TRLOG in the contest this weekend, but am having a problem with the packet
> interface. If I jump to the packet window using CTRL-B, I can log onto
the
> packet cluster, enter commands, get responses, etc., everything works just
> fine. You can see the DX Spots rolling in. But, I can never get any DX
> spot information on the main TR screen. I've read the book front to back
> and tried just about all related parameters, with the same results. Have
> tried running in a command window under Win 98 as well as rebooting to a
DOS
> prompt and running from there. Same results. All other functions appear
to
> work properly.
>
> Here's what I have in my CFG file:
>
> MY CALL = K8AC
> CONTEST = CQ WW
> DISPLAY MODE = COLOR
> RADIO ONE TYPE = TS850S
> RADIO ONE CONTROL PORT = SERIAL 3
> PACKET PORT = SERIAL 2
> EIGHT BIT PACKET PORT = TRUE
> PACKET SPOTS = ALL
> PACKET LOG FILENAME = PACKLOG
> BAND MAP ENABLE = TRUE
> BAND MAP ALL BANDS = TRUE
> BAND MAP ALL MODES = TRUE
>
> I get the band map window up OK, and I've started TR using the BANDMAP
> parameter just to prove that you really can get data into that window. I
> must be missing something very basic here. Any ideas?
>
>
>
>
>
>
> K8AC
> Floyd Sense - Angier, NC
>
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|