> <<-Allowed Alt-D command to be process after entering a callsign
> and AUTO CALL TERMINATE. However, the CQ EXCHANGE won't be sent
> until the Alt-D window is closed. However, at least now you
> won't be entering the callsign into the call window.>>
If you have AUTO START SEND set to 4 and do this:
WA7NIN (TR starts sending CW when you press the first N)
Alt-D N6TR <RETURN> (do this while the program is sending WA7NIN)
before 6.55, you would get WA7NINN6TR in the call window.
Now - you will get the proper operation, but the CQ EXCHAGE being
sent to WA7NIN will not start until AFTER you have pressed the
<RETURN> key above.
It is a minor point - as typically any delay would be very small,
unless you have the Alt-D window open for a long time.
Tree
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|