Hi George,
According to the manual Alt-G is supposed "to cycle between the
different available remaining multiplier displays." I've tried
this with the Ohio QSO Party and others, and it appears to do
nothing. When I start the OQP test the 1st multiplier shown is
Ottawa and the last is Wy. I tried the Alt-G in hopes to see the
1st part of the mults, which should be Adams, but nothing
happens. Any thoughts?
Ted - W8TTS
George Fremin III - K5TR wrote:
>
> On Sat, Aug 25, 2001 at 01:42:26PM +0100, Robert Reisenweber wrote:
> >
> > Guess this would fall under the "why didn't I ask this before?"
> >
> > Started TR for the Ohio QSOP and ran for maybe 30 minutes, then the bands
> > folded
> > (solar flare I'd guess). But here is my question:
> >
> > The county multipliers listed goes from Logan through Wyando. Using the
> > "Big
> > Remaining List", I pick up a couple more lines of counties, but cannot get
> > back
> > to Adams county. Thought ALT-G might do something, but nothing.
>
> > So, is there a command to switch back and forth between the beginning
> > counties
> > and the end counties?
>
> The list of mults is created from the .DOM file. There is a limited amount
> of room to show them on the screen. One thing you can do is set TR-Log so
> that is erases the mults as you work them - that way you will only see the
> ones
> you need.
>
> --
>
> George Fremin III
> Johnson City, Texas "Experiment trumps theory."
> K5TR (ex.WB5VZL) -- Dave Leeson W6NL
> geoiii@kkn.net
> 830-868-2510
> http://www.kkn.net/~k5tr
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/trlog
> Submissions: trlog@contesting.com
> Administrative requests: trlog-REQUEST@contesting.com
> Problems: owner-trlog@contesting.com
> Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|