Greetings:
I just spent way too much time with Wayne (N6KR, of Elecraft) trying to
figure out why my K2 w/KIO2 serial interface wasn't polling or updating
data properly when used with TRLog v6.58 or v6.95 (probably others as well).
Turns out that TRLog will not poll the K2 properly if TRLog is run from a
DOS window.
It functions properly(!) if TRLog is run from a DOS boot, either directly
from power-up or if Rebooted to DOS from within Windows.
When attempting to run TRLog from a DOS Window, the symptoms I was getting
were:
1) Failure to routinely update the displayed
frequency while tuning the VFO
2) Blanking of the frequency display as the
VFO was being tuned, and then lengthy (up
1:30) pauses before the new frequency was
displayed
3) Periodic failure to update band changes when made
from the K2
4) Display of the wrong band when changed from
within TRLog
All of these symptoms dieappeared as soon as I rebooted directly to DOS.
Just a note of caution to Elecraft K2 owners, and for the information of
Tree (N6TR).
73 - Tom Hammond N0SS
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|