TRLog
[Top] [All Lists]

[TRLog] SO2R CW Hardware Configuration

Subject: [TRLog] SO2R CW Hardware Configuration
From: aa4ga@contesting.com (Lee Hiers)
Date: Wed, 26 Sep 2001 08:49:15 -0400
On 25 Sep 2001, at 21:40, kl7ra wrote:

> Bob writes:
> 
> >This will be my first year using SO2R operation and I am looking at
> >my options on how to configure and wire both stations.
 

> None of this matter anymore as you can get it packaged and ready to go
> from several companies listed below, may be more by now. 

Admittedly, I don't know what either of these controllers does, but 
with TR, here's how I (and I think most) folks set it up:

LPT1 - use for paddle input and sending CW to rig 1
LPT2 - use for sending CW to rig 2
COM1 - radio control rig 1
COM2 - radio control rig 2

Or similar.  I think the COMs can be used simultaneously for radio 
control and keying, but I never got it to work out, and the above 
configuration works FB for me.

No relays needed...TR takes care of which rig does the sending.  RX 
audio is handled like Rich says...with a simple box that allows 
listening to either Rig 1, Rig 2, or both rigs (one in each ear).  I 
use a 3 position stereo guitar switch (nice big handle!), some folks 
use a separate toggle for each ear to select which radio is the 
source.

YMMV...

Lee

--
Lee Hiers, AA4GA
Cornelia, GA

aa4ga@contesting.com

--
FAQ on WWW:               http://www.contesting.com/FAQ/trlog
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:         http://web.jzap.com/n6tr/trwish.html


<Prev in Thread] Current Thread [Next in Thread>