TRLog
[Top] [All Lists]

[TRLog] Icom filter settings

Subject: [TRLog] Icom filter settings
From: jskatz@sk.sympatico.ca (Sylvan Katz)
Date: Sat, 01 Dec 2001 09:57:00 -0600
> setting out when it tries to set frequencies.  I don't see where the
> 735 class radios have this bit - so hopefully, this isn't a problem
> for them with the current version.

I have an Icom 736 which I guess is in the 735 class. Any sort of qsy, at least
in versions up to 6.59 drops the cw filter. In the past I have written some code
to control my Icom. Maybe the following info might help for Icom 735/736

See Commands 01 & 06  in Icon CT-17 CI-V level converter,

Cn: 01
SC: md|pd
Description "transfers mode"

Cn: 06
SC: md|pd,
Description: "selects mode"

And Subcommand table

Mode: cw
Sub command: 03
Passband:
    wide: 01
    Narrow: 02
    Middle: 03

.. sylvan

----------------
Sylvan Katz, VE5ZX
Saskatoon, SK


--
FAQ on WWW:               http://www.contesting.com/FAQ/trlog
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:         http://web.jzap.com/n6tr/trwish.html


<Prev in Thread] Current Thread [Next in Thread>