I am having problems getting a frequency displayed or any band change made on
the radio being registered with TR.
Set up is TR 6.65a Comm speed 9600 Radio TS2000 Laptop PC is Thinkpad 350C
(486SL @25MHz) DOS 6.22
Using Kermit I can send and receive data from the TS2000 such that I get a
correct response to a command e.g. send 'FA;' get back 'FA00014025000;'
when I am tuned to 14.025MHz on VFO A.
Using TR I can enter a frequency in the callsign field and send it to the rig
which changes to match. Right and Left Shift keys change RIT +/- or zero it
if done together. Alt B, V and M all do what the manual says they do.
Basically the computer controls the rig as one expects.
Radio Config parameters
RADIO ONE BAUD RATE = 9600
RADIO ONE CONTROL PORT = SERIAL 1
RADIO ONE TYPE = TS2000
Running TR radiodebug gives a zero length file.
On the rig there is the 'PC' being displayed in top right corner of display.
Can you help please?
Thank you in advance
Malcolm
G0MIC
|