TRLog
[Top] [All Lists]

[Trlog] Band map and Inactive Radio

To: trlog@contesting.com
Subject: [Trlog] Band map and Inactive Radio
From: WG0M@aol.com
Date: Sun, 28 Sep 2003 15:09:02 EDT
List-post: <mailto:trlog@contesting.com>
Hi All;

I am working on setting up for SS.

Is there any way to send a packet spot from the band map to the inactive 
radio?

Assume the following TR settings:

Auto Dupe Enable S and P = true

Band Map All Modes = False
Band Map all bands = true
Band map Dupe Display = False

Packet band spots = false
Packet Spots = mult

Skip active band = true

Then the call would be moved the upper right and the inactive rig would be on 
the frequency of the station selected in the band map using cntl-end.  

Here is where we need a new keystroke to move not to the active radio, but to 
the inactive radio.  

The operation would continue similar to alt-D operation.  Hit the space bar 
to send your call etc.  Then return to the run radio.

Idea here is that using the switches set as shown above, TR would only show 
mults needed on all bands.  While running radio one in CQ mode, select a spot 
and send it to the inactive one.  Work him and back to radio 1.  If you can't 
hear him, move the radio frequency a small amount would reset everything for 
the inactive radio and what is shown on the screen.  

Keep the original basis of operation to continue the ability of sending a 
spot to active radio.



73's

Michael WG0M
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog

<Prev in Thread] Current Thread [Next in Thread>