It seems that Marko is asking about the same thing I asked a couple of
week ago. In older TR versions one could put DVK- message to inactive radio like
DVK1= (CTRL-A)DVK 1 (CTRL-something) DVK DELAY = XXXX (time to keep ptt on in
ms)
But at least with version 6.74 or so, the ptt delay command doesn´t work
anymore.
I tried to swich back to older version of TR with same logcfg.dat file, and
everything worked just
fine again.
I haven´t tried yet how does this work with latest TR version, but just in case
I´ll take version 6.6/5x with me to OH0B next weekend.
73 de Toni, OH2UA
Tree kirjoitti 20.10.2003 kello 20:03:
> On Mon, Oct 20, 2003 at 07:20:09PM +0300, Marko Holmavuo wrote:
> > Hi,
> >
> > I wonder is it possible to define PTT delay when using external DVK with
> > N6TR? I would like to use MFJ voice keyer with TR. Is there any way to
> tell
> > TR how long the PTT should be activated when e.g. DVK1 message is
> launched?
>
> Isn't the PTT driven my the DVK? TR doesn't current drive the PTT when
> using
> a voice keyer (including the DVP). I guess what you asking for is
> for TR
> to drive it for a little while and delay sending the command to the DVK,
> and
> then unassert PTT after the DVK has taken over?
>
> Tree
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
............................................................
Maksuton sähköposti aina käytössä http://luukku.com
Kuukausimaksuton MTV3 Internet-liittymä www.mtv3.fi/liittyma
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|