Igor,
I am using a DVP board and mine works fine! I don't need to hit 'F1' unless
to repeat.
In my config file I don't have any '=' signs but just record the message
again.
Mike W9RE
> -----Original Message-----
> From: trlog-bounces@contesting.com
> [mailto:trlog-bounces@contesting.com]On Behalf Of ua4fer
> Sent: Thursday, October 23, 2003 3:09 AM
> To: trlog@contesting.com
> Subject: [Trlog] so2r ssb question
>
>
> Dear contesters,
>
> In operation TWO RADIO MODE ssb after performig ALT-D dupe check on
> the inactive radio and then pressing the space bar my second radio
> becomes active in s&p mode and have a callsign of the station whom
> I'm calling in the call window but DVP doesn't play mycall.dvp file.
> It needs to press F1 or ENTER to play it.
> I don't like this second pressing on the keyboard.
> Is it the way to make the second radio active and start
> calling with only one hit on the space bar? In cw mode it works fine
> with only one hit.
> In a cfg file I have line: EX SSB MEMORY F1 = EXF1.DVP (my callsign)
> I in a sbdvpcfg.dat file I have line: EXF1.DVP
> Should I add something else in configuration?
> TRlog is 6.75
> DVP is SBDVP103
>
> 73 and GL in CQWW
> --
> IGOR UA4FER mailto:ua4fer@pnz.ru
>
>
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|