On Thu, Jan 08, 2004 at 09:20:17AM -0600, K4RO Kirk Pickering wrote:
> According to the WPX rules, for Multi-2 want a seperate serial
> number per TX, and a way to show in the log which tx made
> the qso. What is the best way to accomplish this in TR-Log?
>
I think the only way this is going to work is if
you use QSO numbers by band. I guess if you
used only two computers you could be assured that
this would never have QSO number problems provided
the program had a QSO number per computer feature.
You can tag the QSOs with the computer ID but again if you
are using more than two computers that will not really
seperate out the two "transmitters".
> Also, we may well have an extra station S&Ping on the
> running band, interleaving QSOs as timing permits. How
> should the numbering for this station be handled by TR-Log?
You will just need to make sure that the run and s&p guy
are talking to eachother and deal with it just like you
would if you were doing this on paper.
If the S&P guy is at a third computer you will need to make sure
that the QSO number you are going to give out is one plus the
last one the run guy gave out - you can get out of sync if there
are any network delays etc.
--
George Fremin III - K5TR
geoiii@kkn.net
http://www.kkn.net/~k5tr
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|