On Fri, Jan 23, 2004 at 10:20:54PM -0800, Eric Hilding wrote:
> I wanted to spend a few hours in the ARRL 160, and setup a new .cfg per the
> setup walkthrough.
This weekend is the CQ 160 contest. Did you set the program up for
ARRL or CQ?
> For some reason, TR would NOT log the QSO (either from CQ or S&P) when I
> pressed the Enter Button.
>
> UNLESS...I manually Enterted "599" before the State.
>
> To see if this was some new kind of "Global" problem in TR, I loaded up
> another .cfg file and things worked as normal....didn't have to enter the
> "599"...only the other part of the exchange.
>
> I then cloned all the info in my NAQP .cfg file and changed the name to
> ARRL 160 (along with the exchange info) hoping it would work but the same
> thing... I had to MANUALLY type in 599 State for each QSO in order for them
> to be logged.
>
> ARRRRGGGGHHHHHHHHH ;-(
Can you tell use what callsign(s) and exchange pairs you
were having trouble with or was it all?
Can you send a copy of your config file(s)?
--
George Fremin III - K5TR
geoiii@kkn.net
http://www.kkn.net/~k5tr
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|