I was testing my setup for our next VHF field day in last weekends 23cm
contest using V6.79 hooked up to my TS2000 and came across 2 problems.
I have the function keys set up to operate the voice keyer and wanted to use
the auto repeat function to call CQ interminably as one does on 23cms only
to find it does not work. I seem to remember this working in the past
(certainly with the DVP) and I went back to 6.73 as I have that onboard but to
no
avail. The Function keys key the rig OK and the auto CQ works in CW mode.
Have I missed something or has this never worked or has it been taken out?
The frquency display works fine up to 70cms but disappears on 23 cms. I seem
to recall that there is a problem due to space on the screen over displaying
the extra digit. Unfortunately this field is read by my blind co-operators
braille reader software and then displayed back on the braille keyboard so
that he knows what frequency he is on. If it is not possible to display the
whole GHz units can we have just the rest displayed please? I have tried
using
the frequency adder command (= -1000000000) and that displays the
(residual) frequency OK but does not allow you to switch to 2 metres for
talkback. Are
there any alternatives I have missed?
Malcolm
G0MIC
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|