I was perusing the archives and noticed this thread,
which seems to come up during every SS. If you have
CALLSIGN UPDATE ENABLE = TRUE, and type a single digit
qso number exchange, such as 1B67LAX, 1B67LAX will be
construed as a callsign, and will not be parsed
correctly. Two workarounds are mentioned below:
--------------------------------------On Fri, 14 Nov
2003 22:46:36 -0600 "Mark Beckwith"
<mark@concertart.com>
writes:
> >I believe it only requires one added space...
between "1B" and
> "67LAX"...
> >e.g. 1B 67LAX, and it'll parse things correctly and
you'll NOT
> lose the
> call.
-------------------------------------------It works fb
if you have:
callsign update enable = false
You just then have to edit callsigns in the
callsign window, instead of typing them in
the exchange window. For me, it's easier to
edit callsigns up there anyway. I usually have
at least a pretty good fragment in there.
---------------------------------------------
Dave Hachadorian, K6LL
Yuma, AZ
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|