TRLog
[Top] [All Lists]

Re: [Trlog] Exchange radios

To: trlog@contesting.com
Subject: Re: [Trlog] Exchange radios
From: K4RO Kirk Pickering <k4ro@k4ro.net>
Date: Tue, 31 Oct 2006 07:29:54 -0600
List-post: <mailto:trlog@contesting.com>
EXCHANGERADIOS is working fine here with an 
IC-781 and IC-765, both radios at 4800 baud.

I did notice something different with 6.83,
but so far it does not appear to be a problem.

Basically, it seems that the CW keying line
on the parallel port must be "initialized" 
(for lack of a better word) in some fashion 
before it works.

When the program first starts, at least one
of the radios won't key (sometimes both.)
After a few "Alt-R" commands and some paddle
sent dits, both radios start sending CW OK.
All works fine until the next program re-start.

Just wanted to mention this in case someone
else was experiencing this. Again, it does not
seem to be a problem, but it might be confusing
at first.

73

-Kirk  K4RO



On Sun, Oct 29, 2006 at 08:04:08PM -0800, Tree wrote:
> 
> I have EXCHANGERADIOS and LASTCQFREQ working again - I think.
> 
> Please let me know if it works the way it used to for you:
> 
> http://www.kkn.net/~tree/TR683.ZIP
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog

<Prev in Thread] Current Thread [Next in Thread>