TRLog
[Top] [All Lists]

Re: [Trlog] IC7800 and TR

To: <trlog@contesting.com>
Subject: Re: [Trlog] IC7800 and TR
From: "Mike Wetzel" <mjwetzel@comcast.net>
Date: Fri, 5 Jan 2007 18:36:14 -0500
List-post: <mailto:trlog@contesting.com>
K9DX suggested turning "transceive on" which I did with these results.

Using ver 6.79 and either IC756PRO or IC756PROII  and addresses of (decimal
/hex)  38/26h, 106/6Ah, 92/5Ch, and 80/50Hh when ever I turned the tuning
knob the frequency would show up on the screen for about 2 seconds and then
disappear.  Direct entry of frequency and split modes did not work at all.

Using ver 6.85 with 'transceive'  on I got no response at all.

Mike W9RE

-----Original Message-----
From: trlog-bounces@contesting.com [mailto:trlog-bounces@contesting.com]On
Behalf Of Mike Wetzel
Sent: Friday, January 05, 2007 2:35 PM
To: trlog@contesting.com
Subject: [Trlog] IC7800 and TR

Previously ZS4TX said he got TR working with a 7800 by using these
statements:

RADIO ONE TYPE = IC756PRO
RADIO ONE ADDRESS = 106  (6AH on radio)
-----------------------------------------------------------------------
And KE5C said he got TR working with a 7800 by using:

RADIO ONE TYPE = IC756PROII
RADIO ONE ADDRESS = 80  (50H on radio)
---------------------------------------------------------------------
Also a local said his 756PROII had an address of 5C so I tried that

RADIO ONE TYPE = IC756PROII
RADIO ONE ADDRESS = 92  (5CH on radio)

But none of the above worked at all (no communication between the radio and
computer).
----------------------------------------------------------------------
I can get only get

RADIO ONE TYPE = IC781
RADIO ONE ADDRESS = 38  (26H on radio)

To work but the split function takes the main VFO to the split frequency not
the sub VFO and operation is slightly sluggish (swap radio doesn't work 100%
of the time).

I have tried both 6,85 and 6.79 TR versions.

I tried both IC756PRO and IC756PROII for the radio type.

I have tried a CT-17 clone and direct connection from the radio (db9) to
computer serial (db9) with same results.

My 7800 has firmware 2.10.

Can anyone suggest anything else that I might try or that I am overlooking?

Thank and HNY,

Mike W9RE




_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog


_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog

<Prev in Thread] Current Thread [Next in Thread>