Don't forget that Trlog is smart enuf to do math..... I have a shortcut
key to send the previous QSO's number by programming 5nn #-1 so if you
made the exchange key say 5nn #+500 your log should start at 501
73 Don
VE6JY
-----Original Message-----
From: trlog-bounces@contesting.com [mailto:trlog-bounces@contesting.com]
On Behalf Of Wa3aan@aol.com
Sent: May 28, 2007 4:09 PM
To: trlog@contesting.com
Subject: [Trlog] Serial number greater than 1
Yes Mike (K9MI), I was unable to copy the log.dat from pc1 to pc2 at
the
time. I was hoping to go back after the contest and make a merge like
Mike
(K9NW) suggested. At this point in the contest (3 digit serial numbers
in) I
did not want to take the time for a dummy log ... It would be great to
have a
cfg command in the form "Serial Number = n"
73
Grant
WA3AAN
--------------------------------------------------------------
By crash, you probably mean you couldn't get back to the #1 pc and copy
your
log.dat and put it on pc # 2?
73 Mike K9MI
I don't think there is any built-in way to do this. You could fill the
new
log with dummy QSOs I guess - probably less desirable if you have to
fill in
a large number of them.
Best option may be to just merge the two logs after the contest and
submit
it that way. As long as the appropriate QSO info is in the Cabrillo
file it
should be ok. I think....
73, Mike K9NW
************************************** See what's free at
http://www.aol.com. _______________________________________________
Trlog mailing list
Trlog@contesting.com http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|