Ok, a year later..... Next question... :-)
How to get the feature working, where the Foot Switch swaps radios?
In ctrl-J, I have "SWAP RADIOS" for "FOOT SWITCH MODE" -- no dice
with that (foot switch keys the current radio). Any other pointers?
- Scott KA9FOX
At 03:15 PM 2/10/2007, you wrote:
>Scott, Use the same port for both radios, and set the RELAY CONTROL PORT
>appropriately. (Dave K6LL is right on target!)
>
>Here is my logcfg.dat
>
>73
>Randy K0EU
>
>MY CALL = K0EU
>MY STATE = CO
>MY NAME = RANDY
>CONTEST = SPRINT
>DISPLAY MODE = COLOR
>RELAY CONTROL PORT = 1
>TWO RADIO MODE = TRUE
>KEYER RADIO ONE OUTPUT PORT = PARALLEL 1
>KEYER RADIO TWO OUTPUT PORT = PARALLEL 1
>PADDLE PORT = 2
>SWAP PADDLES = TRUE
>RADIO ONE TYPE = ft1000d
>RADIO ONE CONTROL PORT = SERIAL 1
>RADIO ONE NAME = LEFT(1)
>RADIO TWO TYPE = FT1000D
>RADIO TWO CONTROL PORT = SERIAL 3
>RADIO TWO NAME = RIGHT(2)
>FOOT SWITCH PORT = 2
>FOOT SWITCH MODE = QSO NORMAL
>AUTO S&P ENABLE SENSITIVITY = 500
>
>
>_______________________________________________
>Trlog mailing list
>Trlog@contesting.com
>http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|