----- Original Message -----
From: "Bill O'Kain" <k4lta@comcast.net>
To: "Tree Tyree" <tree@contesting.com>
Sent: Tuesday, December 02, 2008 4:17 PM
Subject: RE: TRLog Question
> Tree, I have been working with my Kenwood TS480SAT with TRLog, trying to
get
> the Com port 1 to change the frequency on the Kenwood, as it does with
> TenTec TX. I am using a Laptop computer with DOS and Windows 98. The
> keying circuit using the parallel port works fine. Any suggestions as how
> to get the Kenwood to change freq when I key the freq in using TRLog?
> I have checked baud rate, stop bits, etc. and they are all set to the
same,
> 9600 baud rate 2 stop bits, no parity.
>
> I put a request for help on the Reflector and KK1L tried to help me but we
> still cannot get it to work. Do you know of anyone else using this same
> set-up and controlling the rig using TRLog?
>
> Thanks for Zone 3 in the CQWWDX Contest on 160M.
>
> 73
> Bill K4LTA
>
>
>
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|