After the CONTEST line insert EXCHANGE RECEIVED = RST ZONE
That should work.
BTW TR4W works very well now. It has even got built in recorder for recording
the entire contest, supports all the contests and generates correct cabrillo
files. Can be found here http://tr4w.qrz.ru
73, Igor UA9CDC
----- Original Message -----
From: "Zivney, Terry L." <00tlzivney@bsu.edu>
To: <miroslav.sibilja@amis.net>
Cc: <trlog@contesting.com>
Sent: Saturday, January 24, 2009 3:11 AM
Subject: Re: [Trlog] CQ 160 with vintage TRLog?
> It's not perfect, but I decided to go with the line:
>
> Exchange received = RST Domestic QTH or QSO number
> inserted after the Contest line in the logcfg.dat file
>
> Terry N4TZ/9
>
> ________________________________________
> From: Mirko S57AD [miroslav.sibilja@amis.net]
> Sent: Friday, January 23, 2009 3:32 PM
> To: Zivney, Terry L.
> Cc: trlog@contesting.com
> Subject: Re: [Trlog] CQ 160 with vintage TRLog?
>
> Terry, in Ctrl-J menu (in vintage TRLog), set INITIAL EXCHANGE = ZONE!
>
> 73 Mirko, S57AD
>
> Zivney, Terry L. pravi:
>> TRLog 6.78 reads both Orions ok.
>> TRlog 6.91 seems to only read my right Orion, not the left Orion.
>> TRLog 6.93 reads neither Orion! Only the exe and ovr files are
>> different between the three folders. Downloaded 6.93 today.
>>
>> Any ideas? 6.78 doesn't take the zone info for DX. Any way
>> to work this contest in a couple of hours?
>>
>> Terry Zivney, N4TZ/9
>> _______________________________________________
>> Trlog mailing list
>> Trlog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/trlog
>>
>>
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|