Ken,
HI! Hey now help with your particular LSB/USB issue, but I can comment
on putting a marker in the band map. If you press ctrl-ins you will get
a marker with the format "NEWmmss"; where mm is the minute and ss is the
second you made the mark. It is intended for putting a marker in the map
for someone you heard and want to come back to, but did not have the
call for.
73 es God Bless de KK1L...Ron Rossi (kk1l@arrl.net) <><
QTH: Jericho, Vermont
My page: http://home.comcast.net/~kk1l
Kenneth E. Harker wrote:
> Operating at K5TR M/S this past weekend, I managed to get the Elecraft
> K3 into lower sideband on 20 meters on three occasions. On all three
> occasions, the situation was similar:
>
> * TR Log 6.79 (I think)
> * Band map on, dupes suppressed, short messages ignored
> * For whatever reason, the CQ/xxxx marker was not being added to the bandmap
> even though I was using ENTER to send CQs via the DVK. So, to create my
> own marker I was periodically typing 00000000 into the call window, and
> hitting space to dupe-check it.
> * The switch from USB to LSB always occurred between the time I logged an
> S&P station and when I had used the bandmap to get back to my run frequency:
> - S&P station info in fields
> - Hit ENTER
> - Ctrl-End |
> - Arrow keys (multiple) | Switch occurs somewhere in
> - Hit ENTER | here, maybe when I hit ENTER
> - Call CQ by voice, as the program is
> still in S&P mode
> - Hit ESC several time to get back to
> run mode
>
> Of course, nobody expects LSB, so it took several minutes for the
> poor ops below me to kindly tell me what I'd done the first time. This all
> happened on Sunday afternoon, when we had 2500+ QSOs in the log.
>
> Anyone else see this before with a Kenwood or Elecraft rig?
>
>
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|