hi Mark,
From what I've read, jemm385.ese requires and additional program to
make it work, whereas, jemmex.exe includes the required program.
Well, I used to have various flavours of DOS beginning with 3.0 right
uipt to 6.22, but over the years they have been tossed. I did have
6.22 on a floppy, but can't find. Having dos on a floppy presents
another problem. No floppy drive on the ThinkPad A30p, unless I
spring for a superdrive for around $150. It shouldn't be this
difficult to get a dos program running in this day and age on a
laptop. I'm trying to purchase a desktop box with serial and parallel
ports and DOS os, floppy drive locally. If not, no other choice but
to mograte to TR4W.
Thanks for your input.
Paul
ve3zt
++++++++++++++++++++++++++++++++++++++++++++++++
At 06:21 AM 23/04/2010, you wrote:
>Try JEMM386 as a memory manager. If that doesn't work, give up and
>install MSDOS. :-)
>
>73,
>
>Mark, kd4d
>
>
>paul@paul-hicks.ca wrote:
>
> >I've been learning about Freedos.
> >
> >Using a memory manager, in upper right corner of TR:
> > MEM = 100 424
> >
> >After entering a 9 contacts, memory drops to 74 832
> >
> >Also, after entering 3 or four contacts, TR quits, DOS prompt appears
> >with text:
> > invalid opcode at 009A AA02 7293 6A34 9A15 028A 35CA BCA3 890B
> >BE16 C60B 7706 000B
> >
> >Configsys file:
> >devicehigh=c:\himem.sys
> >c:\mem\jemmex.exe (memory manager)
> >dosdata=high
> >dos=high
> >fileshigh=20
> >
> >Any ideas?
> >
> >++++++++++++++++++++++++++++++++++
> >
> >
> >
> >
> >At 04:36 PM 20/04/2010, you wrote:
> >>On Tue, Apr 20, 2010 at 04:18:27PM -0400, paul@paul-hicks.ca wrote:
> >>
> >> > When TR-Log is loaded, I'm left with 3k of ram.
> >> >
> >> > After 1st contact, that drops to 72 kb.
> >>
> >>I keep getting confused with these two data points. If you start off with
> >>3k of ram, how does one drop to 72k?
> >>
> >> > If you are familiar with FreeDOS (I"m not), I'm using version 0.84.
> >> > Many of the commands don't work for me. I get error message, "Wrong
> >> > version of DOS."
> >>
> >>I am also not familar with FreeDOS.
> >>
> >> > I have also seen the errormessage inside of TR, "not enough memory to
> >> > load big list," or words to that effect.
> >>
> >>Sounds like TR is constrained by the amount of free memory.
> >>
> >> > Have you any ideas, Tree?
> >>
> >>Is there some command that can show what is loaded into memory before
> >>starting TR?
> >>
> >>Tree
> >>
> >>
> >>
> >>Checked by AVG - www.avg.com
> >>Version: 9.0.801 / Virus Database: 271.1.1/2822 - Release Date:
> >>04/20/10 02:31:00
> >
> >_______________________________________________
> >Trlog mailing list
> >Trlog@contesting.com
> >http://lists.contesting.com/mailman/listinfo/trlog
>
>--
>Sent from my Android phone with K-9 Mail. Please excuse my brevity.
>
>
>
>Checked by AVG - www.avg.com
>Version: 9.0.814 / Virus Database: 271.1.1/2829 - Release Date:
>04/22/10 14:31:00
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|