I am having some memory issues with TR Log that causes the remaining
memory to go super low when the DVP TSR is loaded, and I suspect is
the root of instability even when not using the DVP.
I am running FreeDos version 0.84 on a dual boot PC with a FreeDos and
a Windows XP partition.
My config.sys file is as follows:
dos=high
dos=umb
device=himem.sys
device=emm386.exe
lastdrive=z
buffers=15,0
files=40
stacks=18,512
My autoexec.bat is as follows:
set temp=c:\
set tmp=c:\
set path=c:\;c:\fdos;c:\log
set prompt=$P$G
set lang=EN
It has been so long since I really knew anything about DOS that I must
confess I don't remember what half of these commands do anymore. But
I do know that my TR is unstable! Have been running 6.8-something or
the other, just put up 6.95. Any suggestions from the brain trust out
there?
- Pat
N9RV
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|