On Sat, Dec 04, 2010 at 02:34:10PM -0500, Zivney, Terry L. wrote:
> Although the parallel ports now give band data in 6.96, unfortunately, the
> band data does not appear to be sent unless the radio is ACTIVE.
> TR reads the frequency of the INACTIVE radio promptly, but does
> not send the band data to the appropriate parallel port unless the
> radio is the active radio. Thus, if you change the band of the inactive
> radio with the band button on the rig, the inactive radio will not have
> a good antenna to listen on until it becomes an active radio.
>
> This is NOT the behavior under 6.78. In 6.78 the band data on
> both radios follows the frequency shown in TRLog.
Thanks Terry - glad you got things working (mostly).
This sounds like it should be an easy bug for me to fix. I'll look at it
this weekend.
Also - for those of you fighting with having enough memory available, I have
put a "protected mode" version of TR up on the website. Feel free to give it
a try and see how it works for you. Would be interested in any comments.
Perhaps this should be the way that TR is distributed from now on.
http://www.kkn.net/~tree/TR700.ZIP
Tree
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|