I don't think you will find a DOS driver for USB/serial adapters.
I have used PCMCIA serial cards on an old Gateway laptop to run trlog so2r,
that approach worked great. I think most serial PCMCIA cards do have a DOS
driver, but check carefully before buying one.
Tor
N4OGW
--- On Sun, 3/6/11, John Unger <w4au@verizon.net> wrote:
> From: John Unger <w4au@verizon.net>
> Subject: [Trlog] USB -> serial adapters for DOS?
> To: trlog@contesting.com
> Date: Sunday, March 6, 2011, 8:48 PM
> I think this question has come up
> before but don't remember is anyone has
> found a solution:
>
> I am trying to configure a laptop with only one serial port
> for SO2R, so
> need to figure out how to add another serial port somehow.
> The simplest
> approach would be to use one of the USB to serial adapters
> that are out
> there, but I don't know if any of them have DOS drivers.
>
> Has anyone had any success with getting around this
> situation?
>
> tnx es 73 - John, W4AU
>
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|