Omni VI 2nd order IMD Mod

TenTec

Omni VI 2nd order IMD Mod

To:	<tentec@contesting.com>
Subject:	Omni VI 2nd order IMD Mod
From:	k5oti@gate.net (John Morris)
Date:	Thu, 28 Mar 1996 08:28:23 -0500 (EST)

Would appreciate hearing from anyone who ever installed the subject 
modification in their Omni VI.

This mod involved changing 2 resistors on the BPF/Front End board and was 
supposed to improve 2nd order IMD from 40 dBm to 60dBm.However, TenTec 
advised that "precious few hams in the U.S. would gain anything from 
improved 2nd order IMD".

If you installed the mod:

1. Degree of difficulty?
2. Any noticeable improvement or difference?

TKS es 73, John K5OTI

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
Omni VI 2nd order IMD Mod, John Morris <= Omni VI 2nd order IMD Mod, Del Seay Omni VI 2nd order IMD Mod, H. L. Serra Omni VI 2nd order IMD Mod, Del Seay Omni VI 2nd order IMD Mod, Clark Savage Turner WA3JPG Omni VI 2nd order IMD Mod, DFREY

Previous by Date:	Various Ten Tec questions, Clark Savage Turner WA3JPG
Next by Date:	Paragon/Omni VI (and other rig) differences, 00tlzivney@bsuvc.bsu.edu
Previous by Thread:	relay noise, Paul H. Bock
Next by Thread:	Omni VI 2nd order IMD Mod, Del Seay
Indexes:	[Date] [Thread] [Top] [All Lists]