TenTec
[Top] [All Lists]

NOISE BLANKERS

To: <tentec@contesting.com>
Subject: NOISE BLANKERS
From: jim.bell@canada.cdev.com (James Bell)
Date: Fri, 28 Jun 96 08:31:00 -700
Some time ago I used the 12 volt relay simulator to set up the 
noise blanker in a Kenwood or Yaesu rig.
The simulator is supposed to mimic ignition noise.
The blanker in the set tuned beautifully and totally rejected 
the simulators noise. 
When tried on other pulse type noise however the blanker needed
slight retuning which could not be handled by the panel controls.
It all goes to show that all noise is not the same and some 
times the owner must tune the noise blanker to reject the 
particular noise on hand.
 Jim   VE3DDY


<Prev in Thread] Current Thread [Next in Thread>