TenTec
[Top] [All Lists]

[TenTec] OMNI-VI Transverter output mod?

To: <tentec@contesting.com>
Subject: [TenTec] OMNI-VI Transverter output mod?
From: seay@Alaska.NET (Del Seay)
Date: Thu, 15 May 1997 12:23:52 -0700
I have checked my OMNI-6 and it goes down to the milliwatt stage. (I
suspect the imd goes to pot down there, tho) It actually goes so low, 
that I can't measure it with any accuracy. The OMNI-V only went down to
about 10 watts, but the SIX should work with any transverter.  de KL7HF

                     *   *   *   *   *   *   *

Al Scanandoah wrote:
> 
> On Wed, 14 May 1997, Warren Walsh wrote:
> 
> >
> > My question to the group is, has anyone on the reflector modified their
> > OMNI-VI to provide a low power output for a transverter?
> 
>  Although this doesn't exactly answer the question, I've had excellent
>  results running a transverter with my Omni V by building up an
>  attenuator to place between the rig's output and the transverter's
>  input, keeping the power out adjustment at minimum. I subsequently
>  routed the transverter's IF out to the aux. RX antenna input so I
>  wouldn't lose gain there.
> 
> 
> Al - wa2vez
> 
> --
> FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com

<Prev in Thread] Current Thread [Next in Thread>