TenTec
[Top] [All Lists]

[TenTec] OMNI-6 Keying Waveform

To: <tentec@contesting.com>
Subject: [TenTec] OMNI-6 Keying Waveform
From: seay@Alaska.NET (Del Seay, KL7HF)
Date: Mon, 23 Jun 1997 13:25:41 -0800 (AKDT)
Re- the comments about the keying not being a problem. Okay - I'll buy
that. It is a matter of preference as long as no clicks are generated.

Here in Anchorage, I live within spitting distance of a whole bunch of
cw operators, and a couple of contest stations. To keep peace in the
family, we all try to keep the garbage down to a minimum. That means
most of us use Ten Tec gear, as the phase noise from the current crop
of JA rigs is not acceptable.
And - hard keying really isn't accepted either, as it does spread out the
required guard area between guys, whether it be from clicks or hard rx agc
action, or what.

So - even tho the keying is good and sharp, if it offends the others here,
we're going to try to soften it. (Some of these guys are BIG!)

Hope this undoes my  faux pas.  de KL7HF


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] OMNI-6 Keying Waveform, Del Seay, KL7HF <=