You may have missed a couple of words. It actually says a standard
null-modem cable must be used. A null-modem cable is a standard 25 pin
serial cable with specific wiring changes. And yes, there is a standard
serial cable AND a standard null-modem serial cable.
At 09:21 AM 9/5/97 -0500, you wrote:
>The Tentec manaul says a standard 25 pin serial cable is OK for
>connection to a computer, but the diagram in the manual shows some pins
>connected together. Does a special cable have to be wired up for rig
>control of the Omni VI?
>Tnx es 73 de John, WA5TWL
>
>--
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Submissions: tentec@contesting.com
>Administrative requests: tentec-REQUEST@contesting.com
>Problems: owner-tentec@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
Chester Alderman
Tom - W4BQF
chestert@pressroom.com
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|