TenTec
[Top] [All Lists]

[TenTec] Interfacing David Clark Headset mic to Omni 6

To: <tentec@contesting.com>
Subject: [TenTec] Interfacing David Clark Headset mic to Omni 6
From: aa4lr@radio.org (Bill Coleman AA4LR)
Date: Wed, 17 Sep 97 10:30:19 -0400
On 9/13/97 10:45 AM, Thomas M. Delker at k1ky@bellsouth.net wrote:

>Has anyone interfaced aviation headsets requiring power to the mic to an
>Omni 6 or related radio??  Seems the mic element will need power as it
>is the amplified type.  
>
>I have a David Clark model with amplified mic element.

The problem with all aviation headset is *NOT* that they are amplified. 
Aviation headsets used to be all carbon microphones, which require a bias 
current in order to work. All subsequent headsets are been designed to be 
compatable, whether they use carbon microphones or not.

Tie the one microphone lead to +12 through a 2.2 kiloohm resistor. Tap 
off the audio using a capacitor of around 1 uF. That should do it.



Bill Coleman, AA4LR, PP-ASEL        Mail: aa4lr@radio.org
Quote: "Not in a thousand years will man ever fly!"
            -- Wilbur Wright, 1901


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>