TenTec
[Top] [All Lists]

[TenTec] TenTec] SSB Xtals

To: <tentec@contesting.com>
Subject: [TenTec] TenTec] SSB Xtals
From: EdGuzis@cris.com (Ed Guzis .)
Date: Sun, 2 Nov 1997 22:51:17 -0600
This is a redirected post - please reply to Larry DiGioia at
<larryd@bright.net>.

Ed, W9TW

----------
From: Larry DiGioia <larryd@bright.net>

Subject: Re: [TenTec] SSB Xtals 
To: <tentec@contesting.com>
Date: Sunday, January 25, 1998 7:12 PM

>Hey, anyone get down on 160 and use their extra CW filters to dig
out
>the little weak ones in between the 60 db over S9 signals right next
>door?  The OMNI VI really shows its colors during the late evening
>on a 160 contest.

 My new Omni arrived the day before the contest. I was operating the
contest (not seriously, as an entrant, just as a DXer) while reading
the manual. I had never transmitted on 160 before, and my previous
rig was a Century 21.

 It was like taking off in a Mercedes after driving a Chevy.

 I operated about 4 hours total, finished the manual, and I now have
24 states and a few countries (including KH6.) Everyone answered on
my first call.

 One of the first things I did was turn the sidetone down to about
525.

 I still have not made my first HF voice QSO, even though I have my
new Heil hooked up to it, CW is just too much fun.

 Problems: like many have said, the Heil does not quite kick the VOX
unless I yell, and have the processor turned up. I don't care, I got
the footswitch anyway. I also am not thrilled that I need to take the
PL-259 off my receive antenna and use an RCA connector.

 I think that the audio seems optimized for CW, hollow-sounding, even
with no filters in, and using amplified speakers (with a subwoofer
yet) and NR off. If I ever get serious about AM, I will need another
rig.

 Last but not least, the manual states that "because of the superb
selectivity and overload performance etc. etc. you may never need to
use the attenuator." I disagree. I could not do without it. Using it
made the crucial difference many times with weak signals in crowded
areas on 160, and I would say that it appears that the DSP functions
much better with it in.

 Thanks to all who helped steer me toward the Omni,


||Larry||    N8KU

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Division of Studio - D Productions         
   http://www.bright.net/~larryd/ 

      90% CW  -   100% HF
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] TenTec] SSB Xtals, Ed Guzis . <=