Not all Ten-Tec radios go to (near) zero watts output with the
PWR control.
Dan, have you tried to find/build an attenuator that will eat up
15 watts to leave you with 5?
73,
dale, kg5u
-----Original Message-----
From: Dan Baldwin <baldwin@primenet.com>
To: Paul R. Valko <prvalko@oakland.edu>
Cc: tentec@contesting.com <tentec@contesting.com>
To: <tentec@contesting.com>
Date: Thursday, June 11, 1998 14:32 PM
Subject: Re: [TenTec] modifying Omni V for QRP ?
>
>You mean "RF PWR" and turning the knob fully counterclockwise
>still sends out a minimum of approx. 20 watts which is above
>QRP Power levels but I am sure you all ready know that.
>Thanks anyway Dan KK7JZ
>
>At 02:37 PM 6/11/98 -0400, you wrote:
>>
>>There is a small knob on the front panel marked DRIVE.
>>
>>Keep it fully counterclockwise.
>>
>>73! =paul= W8KC
>>Collector of Ten*Tecs and other fine plastics
>>
>><http://www.acs.oakland.edu/~prvalko>
>>
>>
>>
>>
>>On Thu, 11 Jun 1998, Dan Baldwin wrote:
>>
>>>
>>> I want to modify my Omni V for QRP power levels. I read an
old posting
>>> which indicated that it could be done but did not include a
description
>>> of the modification. If anyone has any info. on this I sure
would like to
>>> know. Thanks - Dan KK7JZ
>>>
>>>
>>> --
>>> FAQ on WWW:
http://www.contesting.com/tentecfaq.htm
>>> Submissions: tentec@contesting.com
>>> Administrative requests: tentec-REQUEST@contesting.com
>>> Problems: owner-tentec@contesting.com
>>> Search:
http://www.contesting.com/km9p/search.htm
>>>
>>>
>>
>>
>>
>
>
>--
>FAQ on WWW:
http://www.contesting.com/tentecfaq.htm
>Submissions: tentec@contesting.com
>Administrative requests: tentec-REQUEST@contesting.com
>Problems: owner-tentec@contesting.com
>Search:
http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|