Thanks to all for your replies:
Here's more on what they look like:
The plug on the amp looks like this:
| |
_ _
It about 3/4 inch square. Top (verticle) blades are about 3/8 inch apart.
I need a recepticle that will mate with this.
---------------------------------------------------
The recepticle on the PS looks this:
_ _ _
_ _ _
It is 5/8 by 1 inch. All look to accept horizontal blades. Currently, the
right-most two positions are shorted. Removing the jumper disables the power
button on the front.
I need a plug to mate with this.
Thanks again!
Frank KA8SYV
Cayman71@aol.com
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|