This is a multi-part message in MIME format.
------=_NextPart_000_0021_01BE3737.D7E21700
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Tnx Steve, you wrote:
One who pays $3000 for a rig should be VERY PICKY. I would expect the =
BEST sounding transmitter on the air, not the WORST. Even the 20 year =
old Triton 4 sounds better and for that matter, $99 TKIT sounds better =
than a $3000 Omni VI.=20
=20
Interestingly, I noticed your keying had clicks on the lower frequency =
of your carrier about 2khz away from center and was clean on the upper =
side. This goes to further verify what Paul W9AC has been saying. He =
reports good keying on his Omni VI after getting that new 2.8khz fitler =
from INRAD. You may want to look in to that.
=20
Anyway, it's too cold to be concerned about microchirps. I suppose even =
colder there. Sould hit 9 degrees tonight and the snow is falling. 73
Yes,
I'd like an easy cure, and hope this is it. I have not heard =
solid-sounding reports on here confirming it though?? Please advise.
But in my dim thinking, I don't understand the principle involved with =
the 2.8kHz filter. A transmitted carrier passing through a crystal =
filter skirt is strictly a function of amplitude and not of frequency. =
So how can it possibly be that it affects the chirp at all, since the =
very definition of chirp is a frequency change?
I'm sure that my thinking is just too simplistic here, but it does =
trouble me some. If any of you care to "halucinate" me about this please =
feel free to insult me here!
Thanks again & 73 in 99,
Roy K6XK....CHIRP, CHIRP CHIRP! click, click, click!
------=_NextPart_000_0021_01BE3737.D7E21700
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
<HTML>
<HEAD>
<META content=3Dtext/html;charset=3Diso-8859-1 =
http-equiv=3DContent-Type>
<META content=3D'"MSHTML 4.72.3612.1700"' name=3DGENERATOR>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT color=3D#000000 size=3D2>Tnx Steve, you wrote:
<DIV><FONT size=3D2>One who pays $3000 for a rig should be VERY PICKY. I =
would=20
expect the BEST sounding transmitter on the air, not the WORST. Even the =
20 year=20
old Triton 4 sounds better and for that matter, $99 TKIT sounds better =
than a=20
$3000 Omni VI. </FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>Interestingly, I noticed your keying had clicks on =
the lower=20
frequency of your carrier about 2khz away from center and was clean on =
the upper=20
side. This goes to further verify what Paul W9AC has been saying. He =
reports=20
good keying on his Omni VI after getting that new 2.8khz fitler from =
INRAD. You=20
may want to look in to that.</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>Anyway, it's too cold to be concerned about =
microchirps. I=20
suppose even colder there. Sould hit 9 degrees tonight and the snow is =
falling.=20
73</FONT></DIV></FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT> </DIV>
<DIV><FONT color=3D#000000 size=3D2>Yes,</FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT> </DIV>
<DIV><FONT color=3D#000000 size=3D2>I'd like an easy cure, and hope this =
is it. I=20
have not heard solid-sounding reports on here confirming it though?? =
Please=20
advise.</FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>But in my dim thinking, I don't understand the =
principle=20
involved with the 2.8kHz filter. A transmitted carrier passing through a =
crystal=20
filter skirt is strictly a function of <U>amplitude </U>and not of=20
<U>frequency.</U> So how can it possibly be that it affects the chirp at =
all,=20
since the very definition of chirp is a frequency change?</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>I'm sure that my thinking is just too simplistic =
here, but it=20
does trouble me some. If any of you care to "halucinate" me =
about this=20
please feel free to insult me here!</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>Thanks again & 73 in 99,</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>Roy K6XK....<EM><FONT=20
face=3D"Comic Sans MS" size=3D1>CHIRP, CHIRP =
CHIRP!</EM> click,=20
click, click!</FONT></FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT> </DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT> </DIV></BODY></HTML>
------=_NextPart_000_0021_01BE3737.D7E21700--
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|