Charles,
Now that you bring it to my attention, that is what my Omni shows. I use
an external keyer so the 52 never changed. I did not notice that the time
changed to the keying weight, but it does on mine as well.
I learn new things about this Omni every day. Like, one has to turn the
mic gain knob up from zero (totally counterclockwise) in order to get any
output if one wants to check into the Sunday evening Ten-Tec net. It took
me about 20 minutes of futile and perplexed calling before I finally got
clued in to that one. There was no such animal on my Delta 580 !!!
Thanks for the explanation.
73's
Pete, NO2D
Pewee Valley, Ky.
At 16:18 1999/01/04 +0000, Charles W. Shaw wrote:
>
>Pete wrote:
>
>> While in this mode the panel top right hand corner above the
>> clock reads "52".
>
>My Omni VI is upgrade 2. It shows slightly different indications:
> The digits above the "clock" indicate the speed the keyer is set for and
>the "clock" indicates the weighting the keyer is set for (110% [1.10]) in
>my case. Also, I don't need to press USB when going back to normal
operation.
>
>Handy!
>
>
>
>73, Charles
>
>Charles W. Shaw, N5UL
>Hobbs, NM (near the SE corner)
><n5ul@wtaccess.com>
>
>--
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Submissions: tentec@contesting.com
>Administrative requests: tentec-REQUEST@contesting.com
>Problems: owner-tentec@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
>
Pete, NO2D
Pewee Valley, KY
http://members.iglou.com/pinskeep
Ask about my free Linux Morse401.tgz program
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|