TenTec
[Top] [All Lists]

[TenTec] Best Dummy Load Oil..??

To: <tentec@contesting.com>
Subject: [TenTec] Best Dummy Load Oil..??
From: weingaertner@nac.net (Robert Weingaertner)
Date: Sun, 10 Jan 1999 15:16:03 -0500
Tim,

My Heath "Cantenna" instructions say not to use motor oil because
"the vaporizing temperature of moto oil is too low and would cause
excess vapor." Who knows what the additives in motor oil would do?
If you aren't running a kw, mineral oil will work fine. Here is some
more info from the Cantenna manual:

At 200 watts: mineral oil or transformer oil: > 120 minutes
At 600 watts: mineral oil 12 minutes, transformer oil 18 minutes
At 1000 watts: mineral oil 2 minutes, transformer oil 10 minutes

                  73, Bob WB2VUF


randas@mindspring.com wrote:
> 
> Hello to all...I had to empty my gal can 1KW dummy load before a moving
> company would pack it for a cross country trip. My question is what to
> refill it up with. I've heard mineral oil,  peanut oil,  one guy talked
> about useing motor oil.  Just want some thing easy to get and "cheap".
> 
> Thanks for the Bandwidth
> 
> de Tim  K0FL
> 
> --
> FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>