Here are the quotes from my original letter from Ten Tec, dated February 20,
1997 regarding
the features of each of the upgrades.
OPTION 1 - $75 Adds DSP noise reduction, moves DSP low pass filter to front
panel, upgrades
the menu and adds the new tuning speed feature. This modification is easy to
install yourself.
Simply replace the two socketed ICs on the logic board and affix 3 stickers on
the keypad. You
may order by mail or phone at 800-833-7373. Before calling, please write down
the exact revision
number on the IC labeled "logic" currently in your rig. We must have this number
to assure we
send the correct new software. The serial number on the back panel of the rig is
not sufficient
information. The logic board is located on the top right side after removing the
top cover. We
request you return the two old ICs to us after installation of the new ones. We
estimate orders can
be ready to ship by March 7.
OPTION 2 - $125 This is a factory installation of Option 1 including replacement
of 9 buttons on
keypad in place of stickers on 3.
OPTION 3 - $275 This is a complete factory upgrade to OMNI-VI Plus. Includes
Option 2 in
addition to replacement of the 2 circuit boards and wiring harness changes
needed to provide the
new NARROW filter position in the 9 MHz I-F.
73,
Mike -- WB4HUC
Austin, TX
http://wb4huc.home.texas.net/omni-vi/ - The Unofficial OMNI VI Web Site
KN4AB wrote:
> I have an option One upgrade. What would I get by going to Option 3 besides
> the additional 9 mhz filter position. I already have DSP.
> 73 KN4AB
>
> --
> FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> Submissions: tentec@contesting.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: owner-tentec@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|